"Introducing the LevelSmart™ Wireless AutoFill System. LevelSmart™ works in perfect harmony with your existing equipment to maintain a constant water level in your swimming pool, spa, fountain or water feature. With the LevelSmart™, you don’t have to worry about the water level in your pool.Never use a hose again. The patent pending LevelSmart™ technology is field proven and reliable."
LevelSmart™ Wireless Autofill features an extraordinarily simple installation process that features no deck destruction or need for new plumbing. We utilize wireless technology and the pre-existing plumbing to retrofit on any existing construction. LevelSmart™ can also be installed on any new construction project. The retrofit capability eliminates the need for deck destruction, reconstruction, and hours of labor. The LevelSmart™ is the perfect solution for all your pool autofill needs.
The LevelSmart™ uses innovative and patented proprietary sensing methods along with state of the art communication technology which provides the LevelSmart™ a competitive advantage and unmatched dependability. Our engineers have created the perfect solution for all automated filling applications.
LevelSmart™ is the only dependable, yet durable, pool autofill available. The float valve pool leveler is commonly used, however, due to mechanical failure they are replaced often. The float valve pool leveler was originally designed for toilets where they are only in motion 5-10 times a day. However, when float valves are used for other applications, they are repeated motion, which leads to failure in the seal. The failure in the seal results in a water leak and a high risk of overflow.
What’s Included in the LevelSmart 25’ Kit:
We suggest selecting enough feet so the antenna tip will be seen from the sensor location and the equipment pad, or designated fill line location. This will ensure you will have a smooth pairing process and successful communication.
How it works
The LevelSmart™ Sensor wakes up every 30 minutes to check the current water level of your pool, spa, water feature or tank and then wirelessly communicates the information to the Valve Controller. If the current water level is measured below the set level, the Valve Controller will then open the Valve for 7 minutes. The Valve Controller will turn off the Valve after 7 minutes as a failsafe against over-fill. Again, in 30 minutes, the Sensor will check the water level and, if needed, fill for 7 minutes. The Valve Controller will only open the Valve if the current water level is below the level set by the user during installation.
The Valve is plumbed into the manual fill line, or it is "T'd" into the return lines, from a water source. The Valve Controller can then open and close the Valve to fill your pool as needed.