We supply you with those hard to find fittings and supplies you need to do your installation right the first time.
Jandy Never Lube valves
| Jandy 1.5 in -2 port (4724) |
$36.95 |
 |
| Jandy 2 in. -2 port (4716) |
$39.95 |
|
| Jandy 1.5 in - 3 port (4715) |
$41.95 |
|
| Jandy 2 in. - 3 port (4717) |
$44.95 |
|
|
Jandy Check Valves
Jandy check valves are made of the same high quality cpvc material as their 3 way valves. The clear removeable top makes maintenance a snap compared with other designs that need to be cut out and replaced.
| 1.5 in. Jandy check valve (7235) |
$35.95 |
|
| 1.5 in. Jandy check valve - 90 degree (7511) |
$38.95 |
|
| 2 in. Jandy check valve (7305) |
$36.95 |
|
| 2 in. Jandy check valve - 90 degree (7512) |
$36.95 |
|
|
Jandy Valve Actuators
Designed for automation of any Jandy 3 port valve. They require a Jandy controller.
| Jandy JVA - 24 volt Actuator (4424) |
$117.95 |
|
|
Threaded "O" Ringed Union Fittings
These O ringed threaded union fitings are the way to go for all pump installations, or anywhere you want ease of service and installation. Available in 1 1/2" or 2" sizes. These are the same high quality fittings included in our pump plumbing kits.
| 1 1/2" Threaded "O" Ringed Union Fitting (21063150000) |
$9.95 |
|
| 2" Threaded "O" Ringed Union Fitting (21063200000) |
$12.95 |
|
|
2" Clear Check Valve W/Unions & 1/4 - 1/2 - 2 LB Springs Included
This Check Valve has it all in one valve. It features a clear body, 3 springs to allow for fine tuning your specific installation requirements, and unions for easy service.
$29.95
|
CPVC Threaded Nipples
These CPVC SCH 80 threaded nipples are made of a special high temperature plastic that won't shrink or melt. They are recommended for all threaded fittings into and out of pool pumps and heaters.
| 1.5" x 6" cpvc -threaded both ends |
$9.95 |
|
| 1.5" x 12" cvpc-threaded both ends. |
$11.95 |
|
| 2" x 6 " cpvc - threaded both ends |
$11.95 |
|
| 2" x 12" cvpc-threaded both ends. |
$13.95 |
|
|
Flexible PVC Pipe
Flexible schedule 40 pvc pipe can be glued into pvc fittings. It makes plumbing those tight areas much easier.
| 1 in. flexible pvc - 50 ft. roll |
$49.95 |
|
| 1 1/2 in. flexible pvc - 50 ft. roll |
$68.95 |
|
| 2 in. flexible pvc - 50 ft. roll |
$112.95 |
|
|
PVC Unions
PVC Unions allow for an easier installation as well as servicing flexibility.
| 1.5 in. pvc unions (pvc15) |
$7.95 |
|
| 2 in. pvc. unions (pvc25) |
$8.95 |
|
|
PVC 90 degree elbow
Slip x slip fitting. Pipe is glued into both sides.
| 1.5 in. PVC 90 (PVC15-2) |
$1.55 |
|
| 2 in. PVC 90 (PVC20-2) |
$1.75 |
|
|
45 degree fittings
Slip x Slip 45 degree fittings.
| 1.5 in. PVC 45 |
$1.55 |
|
| 2 in. PVC 45 (PVC45-1) |
$1.75 |
|
|
PVC Tees
Slip x Slip x Slip PVC Tee fittings
| 1.5 in. PVC Tee |
$1.55 |
|
| 1.5 in. PVC Tee with 3/4 in. threaded top |
$2.55 |
|
| 2 in. PVC Tee |
$1.95 |
|
| 2 in. PVC Tee with 3/4 in. threaded top |
$2.99 |
|
| 3/4" Plastic Hose Bib |
$5.95 |
|
|
PVC MIP X Slip adapters
Mip x Slip Adapters are male threaded on one end and slip on the other.
| 1.5 in. PVC Male Adapter (PVCM-1) |
$0.95 |
|
| 2 in. PVC Male Adapter (PVCM-2) |
$1.15 |
|
|
PVC Couplers
Slip X Slip PVC Couplers
| 1.5 in. PVC Coupler (PVCC-1) |
$0.95 |
|
| 2 in. PVC Coupler (PVCC-2) |
$1.15 |
|
|
PVC Caps
Slip Caps for capping the end of a PVC pipe
| 1.5 in. PVC Cap |
$1.15 |
|
| 2 in. PVC Cap |
$1.35 |
|
|
PVC Reducer Bushing 2"x1.5"
Spears 2in x 1.5in SPG x Slip PVC Reducer Bushing
$1.75
|
Copper to PVC Pipe Quick Adapter
Flo Control "No Sweat" Copper to PVC pipe quick adapters are the easy way to transition from copper pipe to PVC pipe when plumbing your pool equipment.
| Flo 3/4in PVCxC Compression Adapter |
$4.95 |
|
| Flo 1in PVCxC Compression Adapter |
$10.95 |
|
| Flo 1.5x1.25in PVCxC Compression Adapter |
$11.95 |
|
| Flo 1.5in PVCxC Compression Adapter |
$14.95 |
|
| Flo 2in PVCxC Compression Adapter |
$17.95 |
|
|
Pump Plumbing Kits
Pump plumbing kits contain all of the specialized fittings needed to install your pool pump right the first time.
Kits include 2 Threaded "O" Ringed Union Fittings, 1 pt. of Pool Tite PVC glue, 1 roll teflon tape, and 1 tube silicone sealant. Available in 1.5" and 2" sizes.
| Pump Plumbing Kit 1.5" size |
$39.95 |
|
| Pump Plumbing Kit 2" size (PPK2) |
$44.95 |
|
|
Miscellaneous Plumbing Supplies
Pool Tite PVC Cement, teflon tape, silicone cement.
Pool Tite cement can be used for all sizes pvc. up to 6 in. diameter, flex pvc, and DWV pipe.
| Pool-Tite Pt. size |
$9.95 |
|
| Pool-Tite Qt. size |
$17.95 |
|
| Magic Lube 2 - 1 oz. |
$4.50 |
|
| 1/2 x 520" Roll Teflon Tape |
$1.99 |
|
| Clear Silicone-3 oz. |
$5.00 |
|
|
Canvas HydroFlush - 1.5in up to 2.5in pipe
Description
Petersen Products 102-002 DrainJet Hydraulic Drain Flusher 1.5" TO 2.5" DIA
Drain Flusher
Petersen® Drain Flushers open clogged drains with powerful jet action with backflow protection.
Petersen Products 102-002 DrainJet Hydraulic Drain Flusher 1.5" TO 2.5" DIA
Features:
• Easy to use
• Backflow protection
• Constructed with stiffener spring
• DrainJet™ turns household water pressure into a powerful jet. Flushing force and hydraulic action break through toughest obstructions.
• Flexibility: The Petersen® Drain Flusher easily snakes around bends and elbows.
• Stiffener spring (all models except 10-1002) allows "snaking" around pipe bends.
• Tough professional quality construction: Constructed of heavy duty specially treated reinforced industrial fabric for extra strength.
• Six models to fit every need: Six heavy duty DrainJet™ models for drains from 1-1/4" - 6" diameter.
• 3/4" Aluminum Water Hose Coupling, 8.75" Deflated Length
• Multi-Flex™ Multiple Ply Construction, High Flow Rate Flushing
• Flexible For Insertion Around Bends, Internal Stiffener For Easy Insertion
• Pipe Diameter (Maximum 2.50 in, 63 mm), (Minimum 1.5 in, 38 mm)
• Deflated Length (9.25 in, 235 mm)
THE HYDRAULIC DRAIN FLUSHER FOR THE PROFESSIONAL
Drain Jet design turns household water pressure into a powerful jet.
Flushing force and sudden action break through toughest obstructions.
Much greater flow rate than bulb-type flushers that require much of the pressure just to expand the rubber. DrainJet™ Hydraulic Drain Flusher puts all the water flow and pressure to work. Effective within a wide water pressure range: 30 to 100 psi.
$34.95
|
