HI-BUILD EPOXY POOL PAINT

REJUVENATES EVEN THE ROUGHEST SURFACE INTO HARD TILE FINISH

Our 2-part Hi-Build epoxy coating provides a hard non-porous tile finish that is durable to automated cleaners and pool chemicals. Hi-Build is crammed full of epoxy resin, U.V. stabilizers, and protect against damage caused by algae, U.V. rays and chlorine. Plus, it’s easier to keep clean than a plastered pool!

Hi-Build has excellent fill qualities, resulting in a perfect application – even on imperfect pool surfaces. This self-priming coating also has a 1:1 mix ratio, which makes it a much stronger, heavier duty epoxy than other leading brands with much lower mix ratios.

Apply over most types of epoxy pool coatings in good condition. Can also be applied over bare concrete, plaster, gunite, and fiberglass. High build to 16 mils in two coats. Lasts up to 8 years. Dries quickly. Available in White and Dawn Blue.* 2 Gallons.

Coverage: Up to 125 sq. ft. per gal.

*Custom colors available for special order. Call for details.

AQUA LUSTER™ – PREMIUM ACRYLIC PAINT

VERSATILE NEW PAINT LASTS LONGER THAN RUBBER BASE AND EASY TO APPLY AND CLEAN

Due to its negative environmental impact, chlorinated rubber based paint is being phased out across the country. Aqua Luster™ has been formulated to give a superior coating and is also environmentally friendly. Aqua Luster™ outlasts “rubber base” paints and cleans up with soap and water, not hazardous thinners. Two coats of Aqua Luster™ will last up to four years. Not only is the paint long lasting, but due to its excellent coating proprieties, Aqua Luster™ will cover up to 250 feet per pail more than rubber base paint.

Aqua Luster™ dries to a beautiful high gloss finish that is stain resistant and easy to clean. Aqua Luster™ can be used to recoat all chlorinated and synthetic rubber as well as water based acrylic paints. It can be applied on bare concrete or plaster without a primer and can even be successfully applied on damp surfaces.

Add Aqua Luster™ to your pool this spring and see the difference this new coating will make. Available in White, Dawn Blue, or Royal Blue. One gallon.

Coverage: Up to 400 sq. ft.

*Royal Blue is a custom color that we stock. Many other custom colors are available for special order. Call for details.

WATER-BASED ACRYLIC POOL PAINT

PAINTS OVER RUBBER BASE OR EPOXY AND DRIES QUICKER

This economically priced acrylic coating is specially formulated to be applied over other types of pool paints and in damp conditions. Because our acrylic paint dries faster, it is an excellent alternative for pools that want a short down time during painting. Two coats can be applied in just one day! This paint adheres best on cool and damp surfaces and is self-priming. Cleans up with soap and water. Lasts up to two seasons. Available in White and Dawn Blue.

Coverage: up to 300 sq. ft. per gal. Available in White and Dawn Blue.

*Royal Blue is a custom color we stock. Additional custom colors available for special order. Call for details.

RAMUC DECK PAINT (DS)

REJUVENATE YOUR POOL DECK!

This amazing acrylic water-based deck paint great for use on Kool Deck™ and other pool deck concrete surfaces. It was designed as an effective weapon against U.V. rays, weathering, and chlorine – maintaining its vibrant color and appearance for years. You can apply Ramuc Deck Paint™ to damp surfaces or in high humidity conditions. And, best of all, it cleans up and thins water, cures quickly, and no harsh solvent fumes. Use your pool deck again in just 2 days!

Coverage: Approximately 300 sq. ft. per gallon. For non-skid surfaces, simply add SKID-TEX, sand or pumice as desired. Available in 3 colors: Dune Shadow, Cayman Sand, and Silver Creek. 1 Gallon.
For a non-skid deck surface use Skid-Tex at the rate of 1 lb. per gallon.

*Additional custom colors are available for special order. Call for details.

PAINTING ACCESSORIES

SKID-TEX

FOR A SAFER, SLIP-PROOF DECK!

This non-skid additive creates a slip-resistant surface on concrete decks or pool surfaces. It can be used with all Ramuc Pool Paints. Recommended use is one carton (1 lb.) per gallon or broadcast as needed on first coat of paint followed by a second coat to seal the surface.

Eliminates the need for acid washing

This new cleaning product makes surface preparation easier and less
hazardous. Instead of washing and acid washing, just use this clean 7 prep solution. Eliminates the need for dangerous and noxious acid washing. This new product cleans and degreases. It also dissolves mineral deposits to increase porosity for good adhesion on surfaces prior to painting. Clean and Prep Solution can be safely used on all painted surfaces, plaster, concrete, gunite or fiberglass. It is V.O.C. compliant, odor and fume free and completely biodegradable.

One gallon covers between 400-800 sq. ft.

SURFACE PREP KIT

SURFACE PREP KIT PATENTED "ACID MAGIC" CLEANS, ETCHES WITH NO FUMES, & SAFE FOR SKIN & EYES KIT INCLUDES ACID MAGIC, TSP, SCRUB BRUSH, GLOVES COVERS 250 SQUARE FEET PER KIT.

DURATHANE CAULK

Premium gun-grade polyurethane sealant is designed to repair small cracks or fill seams or joints of concrete, metal, glass, or wood. It can withstand continous immersion and should be top coated upon cure. White.